Marine

Sea Pro®

The Sea Pro series utilizes NanoNet®media and provides maximum efficiency.

Certification Logos

Ease of Maintenance

  • Low restriction check valve eliminates loss of prime when draining or changing the filter
  • Sturdy, quick-acting drain for water and contaminant removal
  • Optional Water-In-Fuel (WIF) sensor available

High Performance

  • Meets OEM efficiency requirements
  • 67% increased media area to ensure greater protection of your engine
  • 500+ hour service life recommendation
  • Proprietary media ensures the best fuel/water separation available

Sea Pro Engine Displacement Compatibility Matrix

Engine Displacement (in Liters) Fuel Flow Rate
Gal/hr (L/hr)
Single Short Single Tall Duplex Short Duplex Tall
5-19 40-100 (151-378) X   X  
20-38 101-153 (382-479) X   X  
39-50 154-206 (583-780)   X   X
51-60 207-264 (784-1000)   X   X
This table contains suggestions only. Exact requirements should be determined by consulting engine OEM or Owner's manual information.

 

SEA PRO SHORT SINGLE

SEA PRO TALL SINGLE

SEA PRO SHORT DUPLEX

SEA PRO TALL DUPLEX

Sea Pro Sea Pro Sea Pro Sea Pro
Applications Applications Applications Applications
Diesel Engines with flow rates up to 360 Gal/hr (1363 L/hr) Diesel Engines with flow rates up to 540 Gal/hr (2045 L/hr) Diesel Engines with flow rates up to 720 Gal/hr (2725 L/hr) Diesel Engines with flow rates up to 1080 Gal/hr (4088 L/hr)
Specifications Specifications Specifications Specifications

Height: 19.2" (488 mm)

Depth: 8.8" (222 mm)

Width: 8.2" (208 mm)

Weight (dry): 31 lbs (14.1 kg)

Fuel Capacity (w/o filter):1.2 gal (4.6 L)

Height: 26.7" (678 mm)

Depth: 8.8" (222 mm)

Width: 8.2" (208 mm)

Weight (dry): 43 lbs (19.5 kg)

Fuel Capacity (w/o filter): 2.5 gal (9.3 L)

Height: 24.7" (617 mm)

Depth: 11.1" (282 mm)

Width: 26" (660 mm)

Weight (dry): 80 lbs (36.3 kg)

Fuel Capacity (w/o filter): 2.4 gal (9.2 L)

Height: 32.2" (808 mm)

Depth: 11.1" (282 mm)

Width: 26" (660 mm)

Weight (dry): 103 lbs (46.7 kg)

Fuel Capacity (w/o filter): 4.9 gal (18.6 L)

Legacy Sea Pro®

The Sea Pro series (in development) utilizes NanoNet®media and provides maximum efficiency. Available with optional WIF.

Legacy Sea Pro

Sea Pro 7
Applications
  • Use Sea Pro 5 on marine engines with minimum restriction for maximum fuel flows up to 540 gallons per hour.
  • Marine Applications
  • High Corrosion Areas
Models and Options:
  • Base Model - Unheated
  • Single, Dual & Triple housing units
  • Available with isolation valves
  • Water-In-Fuel Indicators
Call customer service at 800-328-2611 for your nearest distributor.